Accurately mark the installation spot of the doorframe along the standard ink line drawn on doorframe and wall side of opening. Once the accurate spot is confirmed, temporarily fix it using anchor.
Clean the opening before securing the doorframe l Check the vertical and horizontal, install at least three fixed frames on the left and right.
1) Stationary
2) Lumbar
3) Ironing
2. Fixing of doorframes
Fix the doorframe using anchors (at least 3 anchors for left and right side of door each)
- The basis of the quality of door construction is to make sure the horizontality and verticality are confirmed for doorframe.
- For the doorframe with width of more than 1,000mm, fix it using one upper anchor.
Finish by filling with mortar or urethane around doorframes and openings.
1) Urethane Mortar
4. Attaching door line molding (Molding setting)
After the plastering on the wall, fix the door line using glue and Takapin.
1) door line molding
5. Covering
After covering with covering sheet, eliminate them when installing a door.
1) PVC Covering sheet (Installation height 1.2mm)
Door specification
1. Confirm the doorframe and size of the door
2. Mark construction spots
- Confirm hinges of doorframe and door, position of door lock and strike, then begin work. (Progress once discussion with the owner on the construction spot is completed)
- In case a manufacturing of a leaf of door is required, finish it by using sealing or interior sheet (glue) after planing.
3. In case of molding hinges of both frame and door
Hinge molding
Spec. of R/L door
Note
Frame
Door
O
O
3mm
Watch out for stripping of wrapping sheet around the hinges
4. In case of molding hinges of door only
Hinge molding
Spec. of R/L door
Note
Frame
Door
O
O
3mm
Watch out for stripping of wrapping sheet around the hinges